Products
3D models
Sales of illiquid assets
|
For mine excavators, bucket cranes and rotary complexes:
- stick beams;
- rack gearings;
- gear wheels, gear rings, pinion gears, gear shafts, axles of excavators gearings;
- blocks and semi-blocks;
- tension, support and drive wheels;
- bearing housings;
- roller suppot wheels;
- center shafts, circular rails;
- buckets with the capacity of 4.6 m3 to 15 m3 and parts to them (bucket tips, bottoms, walls);
- track links,etc.
For boring rigs the plant produces coupling and uncoupling mechanisms, running gear reducers, rods, adapter connectors, joints, pins.
|
|
For belt conveyors
(with a belt width 650 mm to 2000 mm):
- drive, movable and snub pulleys;
- upper and lower rollers. |
 |
 |
centrifugal pumps NP-500.M, NP-800.2Ì and NP-800.3Ì, with the capacilty of 3800, 8000 and 9500 m3/h respectively and head pressure 58.71 and 80 mm of water column, and high-wear part to them. |
For the crushers of all types, imported and domestically produced;
- crushing heads;
- rotors;
- cams and gear wheels to them;
- adjusting and supporting rings;
- ïready-mounted drive shafts;
- bearing mount assemblies;
- tapered and cylindrical bushings;
- spherical end thrust bearing;
- heads wear plates, fixed wear plates with diameter of 0.7 m to 3 m, ribs wear plates;
- crushing plates;
- frames with the weight of up to 20 tons and others. |
 |
|
For the crushers of KOD, ÊÌD-2200 and DVTs-990 types the supplied spare parts and high-wear replacement parts can be assembled as crushing units. |
 |
|
For ore crushing mills:
- end walls;
- ring gears with diameter of up to 6.3 ì, gear shafts;
- feeders, feeding head, unloading sleeves, hoists, unloading grates;
- cylinder and end walls lining. |
 |
|
 |
The linings manufacutered at the plant will ensure the use of mills with a maximum efficiency. On the basis of a long-time experience and the actual data accumulation the plant had become a pioneer in the invention of ribbed linings which enable to extend a service life by 30-50% with weight reduction by 20-30%. |
For agglomeration and steel making productions:
- sinter trolleys of burning and sintering machines;
- shafts of twin-shaft classifiers with supports, two-valve gates;
- circular coolers pallets;
- plates of unbalanced-throw screens for hot sinter;
- jaw crushers for hot sinter;
- in-line sinter collers;
- slag pots. |
 |
For agriculture products granulation.
|
|
|
